Common Causes of Low Sprinkler Water Pressure and How to Fix Them in Celina, TX

In Celina, TX, homeowners count on their sprinkler systems to keep lawns healthy and landscapes green throughout the growing season. One of the most common problems that can disrupt irrigation is low water pressure, which results in weak spray, patchy coverage, and wasted water. Left unresolved, this issue can damage your yard and increase costs over time.

Andy’s Sprinkler, Drainage, & Lighting proudly serves Celina residents as well as nearby areas including Carrollton, Southlake, Austin, and Lubbock. Our licensed technicians specialize in diagnosing and repairing water pressure problems, ensuring that your irrigation system delivers consistent performance year-round.

In this post, we’ll discuss some of the common reasons for low pressure sprinklers.

How Water Pressure Works in Sprinkler Systems

Before jumping into the causes, it helps to understand how water pressure powers a sprinkler system. Pressure is measured in PSI (pounds per square inch). Spray heads typically require 15–30 PSI to operate correctly, while rotor heads need around 30–50 PSI. Drip irrigation usually functions at even lower pressures—often between 10–25 PSI.

In Celina, where new residential developments often bring higher water demand, keeping your system within the correct PSI range ensures even coverage and prevents dry spots. If pressure drops too low, sprinkler heads won’t pop up fully or may sputter, while excessive pressure can lead to overspray and water waste.

Table of Contents

Causes of Low Sprinkler Pressure
Troubleshooting Low Pressure
Fixes and Upgrades
Preventive Maintenance

Backflow Preventer Valve Issue

One of the leading reasons for low sprinkler water pressure relates to the valves on your backflow preventer device. If you notice limited water pressure in your sprinkler system but normal water pressure inside your home, then the problem might be that your backflow preventer valves are not completely open.

If this is the only issue, the fix is simple: access your backflow valves and open them completely to improve your water pressure. Most backflow preventer devices have two pipes: one that is horizontal and one that is vertical. Since there is typically a valve on both pipes, we’ll make sure that all valves are fully open.

The valves are open once they are parallel to the pipe. We make sure to make adjustments to the horizontal pipe first before moving onto the vertical pipe. To ensure that this is done correctly and that it is the only cause for concern with your sprinklers, it is best to have a professional handle this process.

Water Line Leak or Break

A much more concerning problem involves a break or leak in your water line. This issue is typically caused by digging too close to a water line, then accidentally breaking it. This is common when homeowners install garden stakes or fence posts and accidentally damage one of these lines.

In Celina, where construction and landscaping are frequent due to rapid growth, water line breaks are a common cause of low pressure. A sign that you have a broken line or leak is if you notice any depressions or abnormally wet areas on your lawn. Another sign is if you see water bubbling, which could indicate where the leak is located. One other sign to look out for is a series of sprinkler heads that aren’t working correctly. This could also indicate where the leak is located.

To ensure that the problem is detected and fixed properly, it’s highly recommended that you call the professionals at Andy’s Sprinkler to handle the whole process.

Shut-Off or Main Water Valves Aren’t Fully Open

Other valves you have to keep in mind include the shut-off valve and main water valve. Sprinkler systems typically have a shut-off valve that connects to your home’s water supply. To ensure adequate water pressure, be sure that this valve is opened all the way.

You’ll also want to keep in mind your main water valve, which is the valve that provides water for your entire home. In Celina, some newer homes have pressure-regulating main valves that can restrict flow if not adjusted correctly. To ensure proper water pressure, make sure that this valve is completely open as well. To help find these valves and ensure they are fully open, contact a professional for assistance.

Clogged or Dirty Sprinkler Heads

Sometimes sprinklers may indicate that there is a water pressure problem, but sometimes the issue lies within the sprinkler head. When sprinkler heads are clogged or dirty, then water is unable to flow properly through the system.

If this issue is the culprit, you’ll typically notice some sprinkler heads that are flowing properly and others that aren’t. In Celina, dirt and sediment from construction zones can easily clog heads. In this case, you’ll need to have the sprinkler heads thoroughly cleaned and inspected for other issues. There are multiple steps that go into the proper cleaning process, so be sure to schedule an appointment with a professional company for sprinkler head cleaning service.

Water Line Obstruction

Another common culprit of low water pressure involves what’s happening underground. If you have trees and large shrubs in your yard or close by, then their rooting systems can easily infiltrate your water line.

In Celina, young neighborhoods are often planted with fast-growing shade trees, and their roots can quickly reach irrigation lines. To find a solution to this problem, it is highly recommended that you call a reputable service provider.

Other Common Causes of Low Sprinkler Pressure

Beyond the main culprits, there are several other possible reasons why your sprinkler system may struggle with low pressure:
• Too many sprinkler heads per zone, which overloads the system.
• Undersized or aging pipes that cause friction loss.
• Drops in municipal water supply pressure during peak watering times.
• Zone valve malfunctions or faulty timer settings.
• Whole-home filtration or water softeners restricting flow.

How to Test for Low Water Pressure

If you’re unsure whether your system is suffering from low pressure, here are some quick DIY tests you can try before calling a professional:
• Attach a pressure gauge to an outdoor spigot and check PSI (15–30 PSI for sprays, 30–50 PSI for rotors).
• Monitor your water meter for movement when no water is being used, which may signal a hidden leak.
• Perform a simple “bucket test” by timing how long it takes to fill a gallon container—this reveals flow rate.
• Check sprinkler coverage and spacing against the manufacturer’s recommended ranges.

Fixes and Upgrades

Depending on the cause, solutions can range from quick DIY fixes to full system upgrades:
• Clean or replace clogged nozzles.
• Repair or patch small leaks.
• Reconfigure zones or split overloaded lines.
• Install a booster pump if city supply pressure is too low.
• Upgrade undersized piping in older systems.
• Switch to water-efficient rotary or low-flow nozzles.

For more complex issues, Andy’s Sprinkler, Drainage & Lighting provides professional sprinkler repair throughout Celina and surrounding communities.

Preventive Maintenance Tips

To keep water pressure consistent and avoid major repairs:
• Flush the system seasonally to clear debris.
• Clean filters and sprinkler heads regularly.
• Inspect valves and lines for early signs of wear.
• Winterize your system before freezing conditions hit North Texas.
• Consider installing a smart controller to optimize watering schedules.

Choose Andy’s Sprinkler, Drainage, & Lighting Today!

If you’re dealing with any of the issues outlined above, then it’s time to pick up the phone and call Andy’s Sprinkler, Drainage, & Lighting, find out which location offers sprinkler repair near you. We offer top-notch sprinkler system services and we can ensure your yard is ready to look its best! Contact us today to schedule an appointment.