Sprinkler Repair
We work on most residential sprinkler systems and understand the watering challenges that come with Southlake properties.
Call us today to lock in your savings.
Opt into our text messaging system to begin scheduling your service!
A sprinkler system can be off just enough to cause problems without completely shutting down. One area of the lawn starts looking stressed, another stays too wet, and before long the yard feels uneven no matter how often the system runs. Sometimes it is a head that has been knocked out of position. Sometimes it is a leak underground that no one sees right away. Either way, the system stops doing what it is supposed to do.
We provide sprinkler and irrigation repair in Southlake, TX for homeowners and light commercial properties that need practical help and dependable results. Our team repairs leaking pipes, broken sprinkler heads, bad valves, timer issues, wiring trouble, and low-pressure problems that affect how the system waters the property. In Southlake, where summer heat and dry conditions can put a lot of pressure on turf and landscaping, irrigation problems tend to show up fast.
We work on most residential sprinkler systems and understand the watering demands that come with North Texas weather. We serve Southlake and nearby communities including Colleyville, Trophy Club, Grapevine, Keller, and surrounding areas.
Sprinkler systems deal with constant use, weather exposure, soil movement, and aging components. Over time, even a well-built system starts to develop wear in certain areas. Some of those issues are visible right away. Others take a while to surface.
Broken heads are one of the most common issues in any irrigation system. They can crack from lawn equipment, wear out with age, or shift out of place from foot traffic and ground movement.
Sometimes the sign is obvious because water is spraying sideways or straight up into the air. Other times, the head stays stuck low, does not rotate correctly, or fails to cover the area it used to reach. One broken head can throw off the whole zone.
A leaking line can waste a surprising amount of water without drawing much attention at first. Underground leaks are often caused by cracked pipe, loose connections, root pressure, or changes in the soil.
Homeowners may notice soggy spots that stay wet too long, water bubbling through the soil, or a section of the lawn that always looks greener than the rest. A sudden rise in the water bill can also point to a hidden leak somewhere in the system.
Valves control the water flow to each zone. When a valve stops responding correctly, the irrigation schedule becomes inconsistent.
A zone may stay on too long, fail to start, or turn on only part of the time. In some cases, the valve body is worn. In others, the issue is tied to the solenoid or wiring. Valve problems can be frustrating because they often make the whole system feel unpredictable.
Low pressure can make the system seem like it is still running even though it is no longer watering effectively. Heads may barely rise, spray distance may drop, and parts of the lawn may not get enough coverage to stay healthy.
This may be caused by leaks, clogs, damaged valves, pressure regulation issues, or backflow-related trouble. In Southlake, pressure loss becomes much more noticeable once the heat of summer sets in.
Sometimes the hardware in the yard is fine and the controller is the real problem. A timer may stop following the schedule, skip certain zones, run at odd times, or lose its settings altogether.
These problems can come from wiring issues, power interruptions, electrical failures, or an older controller that is starting to give out. In a hot climate, bad scheduling can stress the landscape just as much as a broken sprinkler head.
We repair many of the parts that affect irrigation performance, including:
Sprinkler heads and nozzles
PVC irrigation pipes
Drip irrigation tubing
Solenoid valves
Manifolds
Backflow preventers
Rain sensors
Smart irrigation controllers
Sprinkler timers
Wire connections
Pump systems
Water pressure regulatorsMost people just want a straightforward repair visit. They want to know what is wrong, what it will take to fix it, and whether the system will work properly again when the job is done.
Step
1
Irrigation System Inspection
We begin by inspecting the system and running the active zones. That helps us see the coverage pattern, identify obvious failures, and check how the system is performing overall.
Step
2
Diagnose the Problem
Once the system is operating, we narrow down the actual source of the problem. That may be a leak, a valve issue, poor pressure, a controller problem, broken heads, or a mix of smaller issues affecting one another.
Step
3
Repair or Replace Components
After diagnosis, we repair usable parts where it makes sense and replace components that are too worn or damaged to continue doing the job.
Step
4
System Optimization
When the repair is complete, we make adjustments to improve how the system waters the property. That can include aligning heads, correcting spray direction, improving coverage, and reducing overspray.
Step
5
System Testing
Before wrapping up, we test the system again to confirm the repair solved the issue and that the zones are operating more evenly than before.
Sprinkler systems work best when they are adjusted with the seasons instead of left on the same schedule all year.
We also provide related irrigation services, including:
Sprinkler system inspections
Sprinkler system tune-ups
Drip irrigation installation
Irrigation rerouting
Smart irrigation controller upgrades
Water efficiency audits
Seasonal maintenance plans
That depends on what is causing the problem. Replacing one damaged head is usually simpler than tracking down an underground leak or repairing a valve or controller issue. The most accurate way to price a repair is by inspecting the system and identifying the exact failure.
Many repairs can be completed in one visit, especially when the issue is isolated to one zone or one obvious component. Larger problems may take more time if multiple repairs are needed.
Not always. It depends on whether access is needed to the controller, shutoff, backyard, or any locked areas of the property. Some jobs can be completed easily once access is available.
We repair most residential sprinkler systems and many light commercial systems, including spray heads, rotor systems, drip irrigation lines, valves, timers, sensors, and controllers.
Once a year is a solid baseline for most properties. In Southlake, many homeowners also schedule a check before summer so the system is ready for the season when watering matters most.
If your sprinkler system is leaking, leaving dry spots, overwatering certain areas, or running inconsistently, it is probably time to have it looked at. A proper repair can improve efficiency, protect your landscape, and help the system keep up with Southlake weather. Schedule sprinkler and irrigation repair service in Southlake, TX today.
